Construction Scheduling Software
Project Scheduling Software
Scheduling SoftwareSchedule SoftwareConstruction Schedule SoftwareProject Schedule Software

Scheduling System Requirements

NOTE-- Goldenseal construction software replaced MacNail back in 2000. We still keep this online manual, to assist die-hard MacNail users! The Goldenseal computer software program runs on Macintosh and Windows. It includes accounting, construction estimating, and project management, plus simple project scheduling.

Macintosh System Requirements

Before beginning with the MacNail construction scheduling software, check to make sure you have the correct hardware and software to run it.
* System Software: For best results, you should have the latest version of System and Finder installed on your hard disk. You can usually get a free copy of the latest system software from your local dealer or User's Group.
* RAM: RAM MacNail requires at least one megabyte of RAM (random access memory). memory You can use a Mac Plus, a Mac SE, a Mac LC, any Mac II, or an SE/30. You can also use any older Macintosh (128, 512, or 512E) that has been upgraded to a Mac Plus.
NOTE: If you are using Excel version 2.2 or greater, we strongly recommend that you have a minimum of two megabytes of RAM (see page 137).
* Hard Disk: Disk DrivesMacNail requires a hard disk of any size. We recommend a 40 megabyte hard disk as a minimum. 60 to 100 megabyte hard disks are not much more expensive, and the extra space will nearly always be worth the extra cost.
* Excel: The MacNail project management software requires that you have a copy of Microsoft Excel loaded onto your hard disk. MacNail 3.0 will only run successfully under Excel version 1.5 or greater. If you are using Excel 1.0, 1.03, 1.04 or 1.06, you will need to get an upgrade directly from Microsoft-- call (206) 882-8088.

Windows System Requirements

Before beginning with the MacNail construction scheduling software, check to make sure you have the correct hardware and software to run it.
* Computer: MacNail requires an IBM PS/2, or any PS/2-compatible computer that is capable of supporting Microsoft Windows and extended memory. For best results, your computer should have at least a 80286 processor, and a clock speed of at least 16 megahertz.
* RAM: RAM MacNail requires at least two megabytes of internal memory (also known as RAM). Microsoft Windows is very memory-intensive, and you may want to install four megabytes of RAM to avoid future memory shortages.
* Hard Drive: Disk DrivesMacNail requires a hard disk of any size. We recommend a 40 megabyte hard disk as a minimum. Choose 60 megabytes or larger if possible-- large hard disks are not much more expensive than smaller ones.
* Mouse: Although MacNail can be run completely from the keyboard, you will find that a mouse makes all operations go much easier. It will let you take much better advantage of the friendlier "graphic interface" that is provided by Windows and Excel.
* Microsoft Windows: MacNail requires that you have Microsoft Windows loaded onto your hard disk. Check your Excel manual to see which version of Windows is required.
* Microsoft Excel: MacNail also requires that you have a copy of Microsoft Excel loaded onto your hard disk.